+7 (812) 495-45-59
Подписка на рассылку:

Хост-адаптер Emulex LightPulse LPe1250

Цены на сайте представлены ориентировочные и не являются официальным предложением (публичной офертой). Информацию по ценам, условия предоставления специальных цен (в том числе и для партнеров), Вы можете получить, обратившись в отдел продаж по тел. (812) 495-4559 или по адресу sales@vit-center.ru

 Каталог /  Системы хранения данных /  HBA и RAID /  Emulex

 
Увеличить

Производитель: Emulex
Артикул: LPe1250

8Gb/s Fibre Channel PCI Express 2.0 Single Channel Host Bus Adapter

Streamlined installation and management, unrivaled scalability, and industry-leading virtualization support make the single-channel

Emulex LightPulse LPe1250 Fiber Channel host bus adapter (HBA) an ideal solution for mixed-OS SAN environments. With powerful management capabilities and broad platform support, it delivers maximum performance in the broadest range of applications and environments.

Proven design, architecture and interface Emulex LightPulse HBAs' highly integrated processor design minimizes onboard components to improve host performance and efficiency. Advanced error-checking features ensure the integrity of block data as it traverses the SAN. Emulex's firmware-based architecture enables feature and performance upgrades without costly hardware changes.

Emulex LightPulse LPE1250-F8 - Network adapter - PCI Express 2.0 x8 - 8Gb Fibre Channel (SW) - fiber optic

Standards

  • ANSI Fibre Channel: FC-PI-4, FC-FS-2, FC-FS-2/AM1, FC-LS, FC-AL-2, FC-GS-6, FC-FLA, FC-PLDA, FC-TAPE, FC-DA, FCP through FCP-4, SBC-3, FC-SP, FC-HBA and SMI-S v1.1
  • PCI Express base spec 2.0
  • PCI Express card electromechanical spec 2.0
  • Fibre Channel class 2 and 3
  • PHP hot plug-hot swap

Architecture

  • Single-channel
  • 8Gb/s, 4Gb/s or 2Gb/s FC link speeds automatically detected
  • Integrated data buffer and code space memory

Comprehensive OS Support

  • Windows, Linux, NetWare, VMware

Hardware Environments

  • x86, x64 and Intel® Itanium® 64-bit processor family

Optical

  • Data rates: 2.125, 4.25 and 8.5Gb/s (auto-detected)
  • Optics: Short wave lasers with LC type connector
  • Cable: Operating at 8Gb/s
    • 50/125 microns (500MHz*km BW) up to 50m
    • 50/125 microns (2000MHz*km BW) up to 150m

 Physical Dimensions

  • Short, low profile MD2 form factor card
  • 167.64mm x 68.91mm (6.60" x 2.71")
  • Standard bracket (low profile available)

Power & Environmental Requirements

  • Volts: +3.3, +12
  • Operating temperature: 0° to 55°C (32° to 131°F)
  • Airflow required: 150 lf/m'
  • Storage temperature: -40° to 70°C (-40° to 158°F)
  • Relative humidity: 5% to 95% non-condensing
  • 23 degree C wet bulb

Agency Approvals

  • Class 1 Laser Product per DHHS 21CFR (J) and EN60825-1
  • UL recognized to UL 60950-1
  • CUR recognized to CSA22.2, No. 60950-1-03
  • Baurt-certified to EN60950-1
  • FCC Rules, Part 15, Class A
  • ICES-003, Class A
  • EMC Directive 2004/108/EC (CE Mark)
    • EN55022, Class A
    • EN55024
  • Australian EMC Framework (C-Tick Mark)
    • AS/NZS CISPR22, Class A
  • VCCI (Japan), Class A
  • MIC (Korea), Class A
  • BSMI (Taiwan), Class A
  • EU RoHS Compliant (Directive 2002/95/EC)
  • China RoHS Compliant

Additional Features

  • Performance Features
    • Doubling the maximum Fibre Channel link rate from 4Gb/s to 8Gb/s and enhanced virtualization capabilities help support IT "Green" initiatives
    • Frame-level Multiplexing and out-of-order frame reassembly increases link efficiency and maximizes HBA performance.
  • Data Protection Features
    • End-to-end data protection with hardware parity, CRC, ECC and other advanced error checking and correcting algorithms ensure data is safe from corruption

Смотрите также:

 
Каталог