+7 (812) 495-45-59
Подписка на рассылку:

Хост-адаптер Qlogic QMC2462S

Цены на сайте представлены ориентировочные и не являются официальным предложением (публичной офертой). Информацию по ценам, условия предоставления специальных цен (в том числе и для партнеров), Вы можете получить, обратившись в отдел продаж по тел. (812) 495-4559 или по адресу sales@vit-center.ru

 

  • 300,000 IOPS delivers high I/O transfer rates for storage applications
  • Intelligent interleaved DMA (iiDMA) ensures maximum utilization of data links
  • Out-of-Order Frame Reassembly (OoOFR) reduces congestion and retransmissions

  Superior Scalability  

  • Multi-ID and N_Port virtualization ready. Allows physical ports to be part of multiple logical networks
  • Virtual fabric (VSAN) ready. Allows physical ports to be part of multiple logical ports
  • Comprehensive Operating System (OS) driver support including Windows®, LinuxTM, SolarisTM, NetWare®, VMware®, and AIXTM

  Enhanced Reliability  

  • Overlapping protection domains for continuous protection of internal data paths
  • Dual-port design protects against "single point of failure" via BladeSystem midplane routing to redundant switch modules.

 

Host Bus Interface Specifications

  Bus interface  

64-bit, 133-MHz PCI-X

  Memory  

  • 1-MB SRAM per port
  • 1-MB flash (SPI)
  • 2-KB NVRAM (SPI)
  • 4-KB EEPROM (I2C)
  •   Hardware platforms  

  • IBM HS20
  • IBM HS21
  • IBM LS20
  • IBM LS21
  • IBM LS41
  • IBM JS21
  •   Compliance  

  • PCI-X Protocol Addendum to the PCI Local Bus Specification, revision 2.0a
  • PCI Bus Power Management Interface Specification, revision 1.1
  •   Fibre Channel Specifications   Data rate  

  • 4/2/1 Gbps auto-negotiation (4.25/2.125/1.0625 Gbps)
  •   Performance  

    150,000 IOPS per port

      Topology  

  • Point-to-point (N_Port)
  • Arbitrated loop (NL_Port)
  • Switched fabric (N_Port)
  •   Logins  

  • Support for F_Port and FL_Port login
  • 2,048 concurrent logins and 2,048 active exchanges per port
  •   Protocols  

  • FCP (SCSI-FCP)
  • FC-TAPE (FCP-2)
  •   Compliance  

  • SCSI-3 Fibre Channel Protocol (SCSI-FCP)
  • Fibre Channel Physical and Signaling Interface (FC-PH)
  • Fibre Channel Physical and Signaling Interface 2nd Generation (FC-PH-2)
  • Third Generation Fibre Channel Physical and Signaling Interface (FC-PH-3)
  • Fibre Channel-Arbitrated Loop (FC-AL-2)
  • Fibre Channel Fabric Loop Attachment Technical Report (FC-FLA)
  • Fibre Channel-Private Loop Direct Attach Technical Report (FC-PLDA)
  • Fibre Channel Tape (FC-TAPE) profile
  • SCSI Fibre Channel Protocol-2 (FCP-2)
  • Second Generation FC Generic Services (FC-GS-3)
  • Third Generation FC Generic Services (FC-GS-3)
  • Fibre Channel Framing and Signaling (FC-FS)
  •   Physical Specifications   Ports  

    Dual 4-Gbps FC

      Form factor  

    IBM Small Form Factor (SFF)

      Environment and Equipment Specifications   Airflow  

    No airflow required

      Temperature  

  • Operating: 0°C/32°F to 55°C/131°F
  • Storage: -40°C/-40°F to 70°C/158°F
  •   Humidity  

  • Relative (non-condensing): 5% to 95%
  • Storage: 5% to 95%
  •   Power dissipation  

    5.6W (maximum)

      Tools and Utilities   Management tools  

  • SANsurfer FC HBA Manager
  • SANsurfer FC HBA Command Line Interface (CLI)
  •   Device utilities   FLASUTIL for updating: Firmware, Boot code, HBA parameters   Boot support  

    BIOS, FCode

      APIs  

    SNIA HBA API V2, SMI-S, and FDMI

      Operating systems  

    Windows, Linux - Red Hat, Linux - SuSE, VMware, NetWare, Solaris, AIX (IBM supplied driver)

     

     
    Увеличить

    Производитель: QLogic
    Артикул: QMC2462S

    Хост-адаптер Qlogic QMC2462S SANblade® QMC2462S Dual Port 4-Gbps Fibre Channel (FC) Small Form Factor (SFF) Expansion Card for IBM® BladeCenter®

    High Performance

                                                                                                        


     

    Каталог